I’m having this issue too. Some tracing: This started happening on 20 Sep for me, after I updated my kernel from 5.2.9 to 5.2.15. Before 4 Oct, I was using Arch Linux …
3/11/2020 · Created attachment 283657 Relevant dmesg output Running Ubuntu 18.04 LTS with stock kernel (4.15.0-54-generic). Firmware failure with stock firmware from linux-firmware package (version 29.1044073957.0) and firmware supplied by Emmanuel (29.4009927039.0).
9/25/2019 · The intention was to have the GEO_TX_POWER_LIMIT command in FW version 36 as well, but not all 8000 family got this feature enabled. The 8000 family is the only one using version 36, so skip this version entirely.
Description: After the update of the kernel and firmware to versions 5.1.16 and 20190628.70e4394-1 the wifi card Intel ac 9620 stopped working: no connection, no detection from ifconfig and `SIOCSIFFLAGS: Input/output error ` setting the interface `up`.
3/2/2020 · [2020-02-05T21:38:08-0500] [PACMAN] starting full system upgrade [2020-02-05T21:44:30-0500] [ALPM] running ’60-mkinitcpio-remove.hook’… [2020-02-05T21:44:30-0500 …
1/5/2020 · Welcome at the forum, @janv. Kernel 5.4 and the driver iwlwifi do not harmonize well at the moment for many users. Best is to use an older kernel such as 4.19 LTS until this has been fixed.
12/11/2019 · Hi all! there is an annoying problem due to the updating of my precision bios (from 1.10.1 to 1.11.1 or 1.12.1) with Ubuntu 18.04 on board: after upgrade, some functions key (Wifi, Brightness Up/Down, Microphone On/Off and probability others) no longer work. Looking in the syslog I see some errors .
Description of problem: Breaks wifi: 05:00.0 Network controller: Intel Corporation Wireless-AC 9260 (rev 29) Subsystem: Intel Corporation Device 0014 Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at a1200000 (64-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: iwlwifi Kernel modules: iwlwifi Version-Release number of selected component (if …
10/22/2018 · Useful Check Point commands. Check Point commands generally come under CP (general) and FW (firewall). Both of them must be used on expert mode (bash shell). Useful Check Point Commands Command Description cpconfig change SIC, licenses and more cpview -t show top style performance counters cphaprob stat list the state of the high availability…, 3/8/2014 · (11-08-2014, 09:53 PM) X3non Wrote: Install mtk drivers as hovatek suggested ..it should help I Installed the MTK drivers labeled MT6577 USB VCOM drivers. I’m not sure these are correct since the phone is 6572. After installation I get the same behavior when I try flashing recovery.
